Introduction
Use this guide to replace the loud speaker in your bq Aquaris M5.
Ce dont vous avez besoin
-
-
Insert the tip of an iFixit opening tool between the back cover and the mid frame of the phone.
-
Slide the opening tool to the bottom of the phone, to snap out the plastic clips, connecting the back cover and mid frame.
-
-
-
-
Unscrew the ten black 4mm Phillips #00 Screws from the mainboard shield.
-
Unscrew the golden 3.4mm Phillips #00 screw on the middle-right side of the mainboard shield.
-
-
-
Take out the seven 4mm Phillips #00 screws, holding the loud speaker unit to the mid frame of the phone.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.