Réparez vos affaires Communauté Boutique

Arnova 7K G3 Rear Cover Replacement

Introduction

Before replacing any components on the Arnova 7K G3 tablet, disassembly is required. That process starts with removing the rear cover to gain access to a majority of the components including the battery, speaker, and logic board.

Ce dont vous avez besoin

  1. Arnova 7K G3 Rear Cover Replacement, Rear Cover: étape 1, image 1 de 3 Arnova 7K G3 Rear Cover Replacement, Rear Cover: étape 1, image 2 de 3 Arnova 7K G3 Rear Cover Replacement, Rear Cover: étape 1, image 3 de 3

    • Remove four 5 mm Phillips #00 screws from each corner of the tablet.

    Modifier

  3. Arnova 7K G3 Rear Cover Replacement: étape 2, image 1 de 2 Arnova 7K G3 Rear Cover Replacement: étape 2, image 2 de 2

    • Place the iFixit opening tool in the notches between the cases and pull the covers apart.

    Modifier

  4. Arnova 7K G3 Rear Cover Replacement: étape 3, image 1 de 1

    • Repeat step two until 3/4 of the rear cover is unlatched.

    • Proceed to remove the rear cover by gently pulling it apart by hand.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 6 autres contributeurs

Tyler Sigafoose

Membre depuis le 03/19/15

210 Réputation

2 tutoriels rédigés

Badges: 5

+ 2 badges supplémentaires

Équipe

Michigan Tech, Team 1-2, Lauer Spring 2015 Membre de l'équipe Michigan Tech, Team 1-2, Lauer Spring 2015

MTU-LAUER-S15S1G2

2 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 384