Aller au contenu principal

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

Assembling Parabolic Solar Cooker Expansion Pipe and T-Bar

Ce dont vous avez besoin

  1. Assembling Parabolic Solar Cooker Expansion Pipe and T-Bar, Assembling Parabolic Solar Cooker Tripod Base Stand: étape 1, image 1 de 2 Assembling Parabolic Solar Cooker Expansion Pipe and T-Bar, Assembling Parabolic Solar Cooker Tripod Base Stand: étape 1, image 2 de 2
    • Insert a 14mm bolt through each tripod leg and through the center plate. Secure each bolt by hand threading a nut on the other side.

    • Be sure the flat side of each tripod leg is facing toward the ground.

  2. Assembling Parabolic Solar Cooker Expansion Pipe and T-Bar: étape 2, image 1 de 1
    • Tighten each nut using two 14mm wrenches until each leg is stable and the tripod will stand on its own.

  3. Assembling Parabolic Solar Cooker Expansion Pipe and T-Bar, Assembling Parabolic Solar Cooker Expansion Pipe and T-Bar: étape 3, image 1 de 2 Assembling Parabolic Solar Cooker Expansion Pipe and T-Bar, Assembling Parabolic Solar Cooker Expansion Pipe and T-Bar: étape 3, image 2 de 2
    • Center the bottom of the expansion pipe between the tabs of the t-bar bracket. Insert a 14mm bolt through the bracket and expansion pipe and hand thread a nut. Use 14mm wrenches to secure the assembly.

    • It does not matter which direction the 14mm bolt is inserted from.

Conclusion

To disassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Ashlie Reott

Membre depuis le 10/20/13

328 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 4-30, Amido Fall 2013 Membre de l'équipe Cal Poly, Team 4-30, Amido Fall 2013

CPSU-AMIDO-F13S4G30

4 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 4

Total : 521