Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

A stand created by three legs is a common method of supporting a load.

Outils

Pièces

Aucune pièce spécifiée.

  1. Insert a 14mm bolt through each tripod leg and through the center plate. Secure each bolt by hand threading a nut on the other side. Be sure the flat side of each tripod leg is facing toward the ground.
    • Insert a 14mm bolt through each tripod leg and through the center plate. Secure each bolt by hand threading a nut on the other side.

    • Be sure the flat side of each tripod leg is facing toward the ground.

  2. Tighten each nut using two 14mm wrenches until each leg is stable and the tripod will stand on its own.
    • Tighten each nut using two 14mm wrenches until each leg is stable and the tripod will stand on its own.

Conclusion

To disassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Ashlie Reott

Membre depuis le 20/10/2013

328 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 4-30, Amido Fall 2013 Membre de l'équipe Cal Poly, Team 4-30, Amido Fall 2013

CPSU-AMIDO-F13S4G30

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 1

Total : 520