Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

In order to replace or fix many parts on the Astak Mole, the mother board must be accessed. This task requires full disassembly of the bottom section of the Mole. This is very easy to accomplish.

Pièces

Aucune pièce spécifiée.

  1. Remove the four bottom tabs in order to access the bottom screws.
    • Remove the four bottom tabs in order to access the bottom screws.

  2. Remove all four 14 mm Phillips #1 screws.
    • Remove all four 14 mm Phillips #1 screws.

  3. Remove the SD card.
    • Remove the SD card.

  4. Pry up the motherboard on the four points using a spudger.
    • Pry up the motherboard on the four points using a spudger.

    • The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.

  5. Gently pull back the motherboard to expose many of the component's wired connections.
    • Gently pull back the motherboard to expose many of the component's wired connections.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Joseph Bello

Membre depuis le 20/09/2016

228 Réputation

2 tutoriels rédigés

Équipe

USF Tampa, Team 2-2, Blackwell Fall 2016 Membre de l'équipe USF Tampa, Team 2-2, Blackwell Fall 2016

USFT-BLACKWELL-F16S2G2

4 membres

12 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 150