Introduction

This guide will walk you through the step by step process of removing the LED screen from the laptop. Screen removal is a multistep process that will require you to keep track of the parts taken out of the laptop. Each screw is accounted for in the steps they are removed.

Pièces

Aucune pièce nécessaire.

Power the laptop off and make sure the charger is unplugged before starting.
  • Power the laptop off and make sure the charger is unplugged before starting.

  • Unscrew the eight PH0 8.0mm screws on the laptop.

  • Unscrew the three PH0 6.0mm screws.

I appear to have FIVE of the smaller screws. The four securing the near edge and the one in the center are smaller than the four securing the far edge and the left and right sides. Either your diagram is wrong, or someone screwed mine together incorrectly.

brucegreer - Réponse

Using the plastic opening tool, lift the back panel from the rest of the laptop.
  • Using the plastic opening tool, lift the back panel from the rest of the laptop.

  • Unhinge all four sides and corners

  • Slowly separate the keyboard panel from the back panel.

  • You won't be able to completely remove the two panels. They are connected by a ribbon cable. Carefully disconnect the cable from the green motherboard.

Ajouter un commentaire

  • The wide ribbon cable connects the keyboard to the motherboard.

  • Disconnect the wide ribbon cable by sliding it out of the motherboard input. Pull the cable toward the battery to dislodge.

Ajouter un commentaire

  • The narrow ribbon cable connect the track pad to the motherboard.

  • Just like the previous step, disconnect the narrow ribbon cable by sliding it out of the motherboard input. Pull the cable toward the battery to dislodge.

Ajouter un commentaire

  • Remove the keyboard from the laptop.

Ajouter un commentaire

  • Remove the six 6.0mm PH0 screws around the battery.

Ajouter un commentaire

  • Using your thumb and index finger, pinch the multi-color cable and disconnect it from the motherboard.

Ajouter un commentaire

  • Lift the battery out of the laptop.

Ajouter un commentaire

  • Unplug the black and white cable from the motherboard.

  • These two wires connect to the webcam at the top of your monitor. The white cable is longer and connects to the bottom import.

Ajouter un commentaire

  • Peel back the tape covering the plug.

  • Slide the cable towards the screen and out of the input.

Ajouter un commentaire

  • Unscrew the 6 screws (5 millimeter) on the top right and left.

Ajouter un commentaire

  • Gently lift the screen up and away from the laptop.

Ajouter un commentaire

  • Pry off the face panel on the screen using the blue prying tool.

Ajouter un commentaire

  • Remove the four 2mm PH0 screws from the four corners of the screen.

Ajouter un commentaire

  • Gently lift screen

  • Peel back the adhesive covering the cable.

  • Remove the cable to free the screen.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Celina Monteiro

Membre depuis le 17/10/2017

113 Réputation

1 tutoriel rédigé

Équipe

UMass Dartmouth, Team S1-G7, Simcock Fall 2017 Membre de l'équipe UMass Dartmouth, Team S1-G7, Simcock Fall 2017

UMASSD-SIMCOCK-F17S1G7

3 membres

4 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 3

30 derniers jours : 13

Total : 192