Aller au contenu principal

Asus DRW-B241 Belt Repair

Ce dont vous avez besoin

    • Insert a "straightened" paper clip into the tiny hole above and slightly to the left of the open & close button.

    • Using a non-magnetized screwdriver, remove the 4 Phillips screws on the bottom of the case.

    • Using a non magnetized flat screwdriver, push in the faceplate tabs on the sides and bottom of the case. Once this loosens the faceplate, gently pry the top edge free.

    • The top part the the case will now lift off of the drive. With the tray extended open, you'll see two wheels near the front, the left one being larger than the right one.

    • Loop the rubber band around the 2 aforementioned wheels, re-assemble your drive, reinstall the drive in your computer, and you're good to go.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Doug Tom

Membre depuis le 05/12/12

115 Réputation

1 tutoriel rédigé

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 952