Aller au contenu principal

Asus Eee PC 1005HA Screen Replacement

Ce dont vous avez besoin

  1. Asus Eee PC 1005HA Screen Replacement, Battery: étape 1, image 1 de 1
    • Lay the laptop upside down.

    • Locate the two battery lock tabs.

  2. Asus Eee PC 1005HA Screen Replacement: étape 2, image 1 de 3 Asus Eee PC 1005HA Screen Replacement: étape 2, image 2 de 3 Asus Eee PC 1005HA Screen Replacement: étape 2, image 3 de 3
    • Slide the tabs outward to unlock the battery.

    • The left tab will remain unlocked, while the right tab must be held.

    • Holding the right tab open, slide the battery out of the laptop.

  3. Asus Eee PC 1005HA Screen Replacement, Screen: étape 3, image 1 de 3 Asus Eee PC 1005HA Screen Replacement, Screen: étape 3, image 2 de 3 Asus Eee PC 1005HA Screen Replacement, Screen: étape 3, image 3 de 3
    • Using tweezers, remove the six screw covers on the screen bezel.

    • Remove the six 4.6 mm screws from the bezel.

  4. Asus Eee PC 1005HA Screen Replacement: étape 4, image 1 de 1
    • Use a plastic opening tool to disengage the plastic clips that secure the screen bezel to the display.

    • Carefully remove the bezel from the display.

  5. Asus Eee PC 1005HA Screen Replacement: étape 5, image 1 de 3 Asus Eee PC 1005HA Screen Replacement: étape 5, image 2 de 3 Asus Eee PC 1005HA Screen Replacement: étape 5, image 3 de 3
    • Remove the four 3.6 mm screws securing the screen.

    • Slowly lift the screen up from the rest of the laptop.

    • The screen is still attached to the laptop by a set of cables. Be careful not to damage them while removing the screen.

  6. Asus Eee PC 1005HA Screen Replacement: étape 6, image 1 de 2 Asus Eee PC 1005HA Screen Replacement: étape 6, image 2 de 2
    • Remove the plastic tape securing the display cables to the back of the screen.

    • Slide the display cable connector out its socket on the back of the screen.

  7. Asus Eee PC 1005HA Screen Replacement: étape 7, image 1 de 2 Asus Eee PC 1005HA Screen Replacement: étape 7, image 2 de 2
    • Remove the four 3.1 mm housing screws on the sides of the display housing frame

    • Remove the housing frame.

Conclusion

To reassemble your device, follow these instructions in reverse order.

13 autres ont terminé cette réparation.

Mitchell Cesare

Membre depuis le 01/31/12

784 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team 11-22, Maness Winter 2012 Membre de l'équipe Cal Poly, Team 11-22, Maness Winter 2012

CPSU-MANESS-W12S11G22

3 membres

12 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 13

Total : 21,225