Aller au contenu principal

Introduction

This guide will provide aid in replacing mouse clickers for users experiencing problems with the mouse clicker such as sensitivity. The user will remove the keyboard and simply unscrew the part.

  1. Use flathead screwdriver or a similar tool to carefully remove top panel of base
    • Use flathead screwdriver or a similar tool to carefully remove top panel of base

  2. Pull up on small white locks on ribbons (circled in red) to release ribbons Unscrew the two 4mm screws on either side of the circuitboard to remove broken component
    • Pull up on small white locks on ribbons (circled in red) to release ribbons

    • Unscrew the two 4mm screws on either side of the circuitboard to remove broken component

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Michael Dooley

Membre depuis le 18/04/2013

132 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 21-52, Johann Spring 2013 Membre de l'équipe Cal Poly, Team 21-52, Johann Spring 2013

CPSU-JOHANN-S13S21G52

4 membres

11 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 691