Introduction
This guide will go over the process of removing and replacing the CPU fan and heat sink assembly.
Ce dont vous avez besoin
-
-
Use a T5 screwdriver to remove all 10 screws that secure the bottom cover.
-
Pull off the back cover of the laptop.
-
-
-
-
Using the iFixit opening tool, gently pry the CPU fan connector out of the socket.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
4 autres ont terminé cette réparation.