Introduction

These steps will show you how to remove the hard drive from you computer.

You will need to do that if the hard drive is in a good condition but the computer is not, replace it to a new one to increase the speed and capacity, or the hard drive has experienced a hardware failure.

Unscrew the 10 screws around the edge of the back panel. Eight of the screws are 0.0793mm T5 ,  two of them are 0.0793 JIS #0. Unscrew the 10 screws around the edge of the back panel. Eight of the screws are 0.0793mm T5 ,  two of them are 0.0793 JIS #0.
  • Unscrew the 10 screws around the edge of the back panel. Eight of the screws are 0.0793mm T5 , two of them are 0.0793 JIS #0.

Ajouter un commentaire

Use the plastic opening tool to pry the back panel off the base of the laptop.
  • Use the plastic opening tool to pry the back panel off the base of the laptop.

Ajouter un commentaire

Unscrew the four 0.0793 mm screws.
  • Unscrew the four 0.0793 mm screws.

Ajouter un commentaire

Using the PH0 and screwdriver from the 54 Bit Driver kit.
  • Using the PH0 and screwdriver from the 54 Bit Driver kit.

Ajouter un commentaire

After removing the four screws, gently push the hard drive downward as shown. After removing the four screws, gently push the hard drive downward as shown.
  • After removing the four screws, gently push the hard drive downward as shown.

Ajouter un commentaire

Lift the hard drive up.
  • Lift the hard drive up.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Wesam Badughaysh

Membre depuis le 09/04/2018

159 Réputation

1 tutoriel rédigé

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 3

7 derniers jours : 13

30 derniers jours : 57

Total : 167