Pour réparer ensemble - Je crée un compte

Introduction

This guide will walk you through replacing the fans in the Asus ROG G20CB gaming desktop. When replacing damaged or loud fans, these steps will help you safely remove and replace them without damaging internal components.

Warning:

Before beginning any work on your desktop, power down your PC and unplug all cables to avoid electric shock or component damage.

Ce dont vous avez besoin

Étape 1 Fan

Asus ROG G20CB Fan Replacement, Fan: étape 1, image 1 de 2

Asus ROG G20CB Fan Replacement, Fan: étape 1, image 2 de 2

Remove each of the two 4.6 mm Phillips screws on the top and bottom of the tower.

Modifier

Étape 2

Slide the front panel to the left and lift gently.
There is a cable connecting the panel to the computer. Handle it gently and avoid straining the connected panel.

Modifier

Étape 3

Disconnect the cable carefully by pulling gently on both sides of the connector.

Modifier

Étape 4

Remove the five 4.6 mm Phillips screws holding down the fan tray and then pull the fan tray out of the system.
The fans are connected by a thin cable, be gentle when removing tray.

Modifier

Étape 5

Carefully unplug the two fan cables from the motherboard by pulling straight up from the base of the connector.

Modifier

Étape 6

Remove the six 4.6 mm Phillips screws connecting the fans to the fan tray.

Modifier

Conclusion

To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.