Aller au contenu principal

Pièces

Aucune pièce spécifiée.

  1. Place the device upside-down. Unscrew the screw at the top of the cover and remove the cover by using a plastic opening tool. Place the device upside-down. Unscrew the screw at the top of the cover and remove the cover by using a plastic opening tool.
    • Place the device upside-down. Unscrew the screw at the top of the cover and remove the cover by using a plastic opening tool.

  2. Batteries pour ordinateurs portables

    Batteries pour toutes les grandes marques d'ordinateurs portables. Qualité assurée par notre garantie.

    Acheter maintenant

    Batteries pour ordinateurs portables

    Batteries pour toutes les grandes marques d'ordinateurs portables. Qualité assurée par notre garantie.

    Acheter maintenant
  3. Remove the screw that is located on the right edge of the removed cover. The screw is in a small opening.
    • Remove the screw that is located on the right edge of the removed cover. The screw is in a small opening.

  4. Inside the opening that the screw was in, use a nylon spudger or any thin tool to push against the inside edge of the disc/optical drive. With the disc/optical drive slightly popped out of the socket, pull the rest of it out by hand.
    • Inside the opening that the screw was in, use a nylon spudger or any thin tool to push against the inside edge of the disc/optical drive.

    • With the disc/optical drive slightly popped out of the socket, pull the rest of it out by hand.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jackson Reynolds

Membre depuis le 18/09/2018

331 Réputation

3 tutoriels rédigés

Équipe

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 66