Introduction

Issues with the ports on the left side of the laptop can indicate that the IO board is in need of replacement. Follow this step by step guide to replace it yourself.

Remove the back 6mm and 8mm screws with a phillips head J000 screwdriver.
  • Remove the back 6mm and 8mm screws with a phillips head J000 screwdriver.

Ajouter un commentaire

Remove the back cover of the flip book by gently using a metal spudger.
  • Remove the back cover of the flip book by gently using a metal spudger.

Ajouter un commentaire

  • Unscrew the battery from the motherboard using a phillips head J000 screwdriver on the 3mm screws.

Ajouter un commentaire

  • The battery comes attached to the motherboard and needs to be disconnected before you can remove it.

  • Disconnect the battery from the motherboard by gently pulling out the connection with tweezers.

Ajouter un commentaire

  • The IO Board will be the section of circuitry to the left. It's held down by a couple of 3mm and 6mm screws and some device connections.

  • Unscrew the 3mm and 6mm screws on the IO Board with a phillips head J000 screwdriver.

Ajouter un commentaire

  • After unscrewing, gently unplug all the connections to the IO Board with tweezers. We have highlighted where these connections are located in our images.

Ajouter un commentaire

  • Remove the final connections from the IO board with tweezers.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Alejandro Lopez

Membre depuis le 15/02/2018

605 Réputation

5 tutoriels rédigés

Équipe

USF Tampa, Team S17-G2, Boczar Spring 2018 Membre de l'équipe USF Tampa, Team S17-G2, Boczar Spring 2018

USFT-BOCZAR-S18S17G2

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 3

7 derniers jours : 4

30 derniers jours : 16

Total : 87