Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Turn the power off.
-
Insert the plastic opening tool between the top and bottom covers of the laptop. The two covers are attached all along the outside of the laptop.
-
Gently pull upwards and carefully pry open the bottom and top covers.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Slide the tool along all four edges of the laptop and continue to pull the tool upwards to fully remove the bottom case from the laptop.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the back cover once it is detached then set it aside.
-
Rotate your laptop to match the orientation shown in the picture to make the guide easier to follow.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the tape and unplug the wire that attaches to both speakers from the soundboard.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use the +J000 screwdriver to unscrew and remove the M2 screw and plastic bracket.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the black tape from the ribbon cable and separate the cable from the soundboard.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use the +J000 to remove the three mounting screws from the soundboard.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the soundboard which has the headphone jack attached to it and replace with the new soundboard.
-
Once done reassemble your device, follow these instructions in reverse order.
-