Difficulté
Modérée
Étapes
6
Temps nécessaire
10 - 20 minutes
- Battery 1 étape
- Wireless Card 5 étapes
Police de grammaire
Réveillez le prof qui sommeille en vous et aidez-nous à améliorer l'orthographe de ce tutoriel !
Images incohérentes
Actualiser les images pour les adapter aux conditions préalables augmenterait la qualité de ce tutoriel.
Puces !
Une bonne utilisation des balises, de la couleur et/ou du format des puces donnera de la clarté à ce tutoriel !
Pièces
Aucune pièce nécessaire.
-
Flip the computer over so that it is upside down.
-
Slide both latches away from each other (towards the outside).
-
Push the battery out with your fingers.
-
Remove screws highlighted on the picture.
-
Once the screws are removed, pry open the panel with the pry tool.
-
It should now look like this.
-
After removing that panel, locate the screw on the right as highlighted.
-
Remove that screw.
-
Pry open the side panel with the small prying tool as shown.
-
That panel should pop off and the wireless card will now be easily visible.
-
Place the small prying tool underneath the gold connector, apply pressure straight up, gently until it pops off.
-
Repeat for the other one.
-
Push them aside.
-
Locate tabs that are holding the wireless card in place. Highlighted in picture.
-
Place one finger on each tab and press each to the side away from the wireless card as shown.
-
The wireless card should pop up as shown. Pull up more with fingers to get more clearance.
-
To remove the wireless card, pull the card directly out.
-
It should come out with just a little bit of pressure.
-
Should look as shown when removed.
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Équipe
Cal Poly, Team 2-9, Johann Summer 2010 Membre de l'équipe Cal Poly, Team 2-9, Johann Summer 2010
CPSU-JOHANN-R10S2G9
5 membres
11 tutoriels rédigés
