Aller au contenu principal

Introduction

This guide will help with removing and/or replacing the back panel.

  1. Turn off the computer and unplug the charge cable.
    • Turn off the computer and unplug the charge cable.

    • If the computer is on or plugged in, it could cause electric shock.

    • Turn the computer upside down.

  2. Remove the nine Philips #00 screws holding the back panel in place (four 5.6mm, four 7.7mm, and one 9.2mm).
    • Remove the nine Philips #00 screws holding the back panel in place (four 5.6mm, four 7.7mm, and one 9.2mm).

  3. Use a plastic opening tool to gently remove the back panel. Use a plastic opening tool to gently remove the back panel.
    • Use a plastic opening tool to gently remove the back panel.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Raveena

Membre depuis le 08/02/2015

194 Réputation

1 tutoriel rédigé

Équipe

UW Tacoma, Team 1-6, Liner Winter 2015 Membre de l'équipe UW Tacoma, Team 1-6, Liner Winter 2015

UWT-LINER-W15S1G6

5 membres

3 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 6

30 derniers jours : 15

Total : 1,868