Introduction

This guide can help fix issues such as file corruption, irregular booting, or can be used to upgrade the hard drive. If the drive is defective, follow this guide to replace the existing hard drive.

Pièces

Aucune pièce nécessaire.

Before doing a repair or replacement make sure the laptop is fully shut off. Using the JIS #0 Screwdriver, unscrew the ten 10 mm screws that hold the back casing in place
  • Before doing a repair or replacement make sure the laptop is fully shut off.

  • Using the JIS #0 Screwdriver, unscrew the ten 10 mm screws that hold the back casing in place

Ajouter un commentaire

Insert the flat edge of the opening tool in between the back casing to remove the back casing. Try to use the opening tool at multiple points. Lifting the back casing abruptly could damage the laptop.
  • Insert the flat edge of the opening tool in between the back casing to remove the back casing.

  • Try to use the opening tool at multiple points. Lifting the back casing abruptly could damage the laptop.

Ajouter un commentaire

Using the JIS #0 Screwdriver, remove the five  3.0 mm screws that hold down the hard drive casing. Using the JIS #0 Screwdriver, remove the five  3.0 mm screws that hold down the hard drive casing.
  • Using the JIS #0 Screwdriver, remove the five 3.0 mm screws that hold down the hard drive casing.

Ajouter un commentaire

Lift the hard drive up and remove the power supply cable connected to it. Make sure to pull on the plastic head and not the actual wires to prevent tearing them. Make sure to pull on the plastic head and not the actual wires to prevent tearing them.
  • Lift the hard drive up and remove the power supply cable connected to it.

  • Make sure to pull on the plastic head and not the actual wires to prevent tearing them.

Ajouter un commentaire

Carefully peel back and remove the plastic hard drive cover to reveal the two 3.0 mm screws on the hard drive casing. Using a JIS #0 screwdriver, unscrew the two 3.0 mm screws on the side of the metal casing to remove the hard drive itself. Using a JIS #0 screwdriver, unscrew the two 3.0 mm screws on the side of the metal casing to remove the hard drive itself.
  • Carefully peel back and remove the plastic hard drive cover to reveal the two 3.0 mm screws on the hard drive casing.

  • Using a JIS #0 screwdriver, unscrew the two 3.0 mm screws on the side of the metal casing to remove the hard drive itself.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Deric Wright

Membre depuis le 14/02/2018

588 Réputation

3 tutoriels rédigés

Équipe

USF Tampa, Team S5-G5, Eyestone Spring 2018 Membre de l'équipe USF Tampa, Team S5-G5, Eyestone Spring 2018

USFT-EYESTONE-S18S5G5

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 6

Total : 49