Aller au contenu principal

Introduction

You may need to replace the battery if it does not hold a charge or the laptop does not turn on. Be aware that this battery is a Lithium-Polymer battery and can explode if punctured.

  1. Flip the device such that the labels are on top. Use a Phillips #1 screwdriver to remove the four 8mm screws near the back.
    • Flip the device such that the labels are on top.

    • Use a Phillips #1 screwdriver to remove the four 8mm screws near the back.

    • Use the same screwdriver to remove the four 5mm screws in the front.

    • Use the same screwdriver to remove the single 9mm screw in the center.

    • Make sure that the device is powered down and unplugged.

  2. Remove the back cover by gently prying with a spudger. Remove the back cover by gently prying with a spudger.
    • Remove the back cover by gently prying with a spudger.

  3. Remove the eight 5mm screws using a Phillips #1 screwdriver. Do not puncture the battery.
    • Remove the eight 5mm screws using a Phillips #1 screwdriver.

    • Do not puncture the battery.

  4. Disconnect the battery ribbon cable from the motherboard.
    • Disconnect the battery ribbon cable from the motherboard.

  5. Remove the battery from the laptop.
    • Remove the battery from the laptop.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

John Thomas

Membre depuis le 13/01/2019

717 Réputation

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 5

Total : 187