Asus VivoTab RT TF600T Screen charging port Replacement

Introduction

If your Asus Vivo Tab is not charging and you have ruled out the charger then this guide is for you. This guide will instruct you on how to remove and replace the charging port inside the tablet portion of your Asus Vivo tab.

Ce dont vous avez besoin

Étape 1 Screen charging port

Asus VivoTab RT TF600T Screen charging port Replacement, Screen charging port: étape 1, image 1 de 3

Asus VivoTab RT TF600T Screen charging port Replacement, Screen charging port: étape 1, image 2 de 3

Asus VivoTab RT TF600T Screen charging port Replacement, Screen charging port: étape 1, image 3 de 3

Make sure the tablet is turned off.
Remove the tablet from the attached keyboard.
To remove the keyboard, simply depress the switch on the left side of the screen and pull the tablet portion off.

Modifier

Étape 2

Asus VivoTab RT TF600T Screen charging port Replacement: étape 2, image 3 de 3

Rotate the device 180°, and remove the two 1.59 mm screws at the bottom of the device.
Use the Phillips screwdriver size PH000 to remove the two 1.59 mm screws.

Modifier

Étape 3

Use the plastic opening tool to help detach the screen from the back panel.
Insert the plastic opening tool into the bottom right corner and gently start to pry off the screen.
Once the screen begins to separate from the body of the device, start working the tool around the outer edges until the entire screen becomes detached.

Modifier

Étape 4

Now that the screen is completely detached, lay the back panel flat on a smooth surface.
Lift the screen to view the inside of the tablet.

Modifier

Étape 5

Before disconnecting the display cables, turn off the switch labeled DIP; this switch is used to de-energize the system.
The battery is connected to the motherboard. To avoid any short circuiting of the device, you must place the switch labeled DIP to OFF.

Modifier

Étape 6

Asus VivoTab RT TF600T Screen charging port Replacement: étape 6, image 3 de 3

Remove the yellow tape covering the end of the cables.

Modifier

Étape 7

After lifting the yellow tape, you should be able to see a white strip. The white strip is actually a lever.
Use the plastic opening tool to push in the levers.

Modifier

Étape 8

Asus VivoTab RT TF600T Screen charging port Replacement: étape 8, image 3 de 3

With all three white levers pushed in, gently pull on each display cable until the cable disconnects.

Modifier

Étape 9

Lift the screen upwards to remove.

Modifier

Étape 10

Rotate the tablet clockwise, so the charging port is turned towards you.
Remove the two 0.79 mm #00 screws from the charging port with the Philips #00 Screwdriver.

Modifier

Étape 11

Place the plastic opening tool behind the charging port, closest to the outer edge of the device.
Gently pry the charging port away from the frame.

Modifier

Étape 12

Remove the eleven 0.79 mm #000 screws around the motherboard with the Phillips #000 screwdriver.

Modifier

Étape 13

Asus VivoTab RT TF600T Screen charging port Replacement: étape 13, image 3 de 3

Use the nylon or metal spudger to help pry the motherboard from the back panel.
Once the mother board is relieved from the glue, use your hand to lift the motherboard up and to the opposite end of the back panel.

Modifier