Réparez vos affaires Communauté Boutique

Asus Vivobook Flip 14 TP410U LCD Assembly Replacement

Introduction

A display can eventually die due to extensive use, or a majority of the times, receive too much damage that it won't function properly. This guide should be followed in order to replace the LCD assembly.

Ce dont vous avez besoin

  1. Asus Vivobook Flip 14 TP410U LCD Assembly Replacement, LCD Assembly: étape 1, image 1 de 1

    • Turn off the power and disconnected the AC cable from the laptop.

    Modifier

  2. Asus Vivobook Flip 14 TP410U LCD Assembly Replacement: étape 2, image 1 de 2 Asus Vivobook Flip 14 TP410U LCD Assembly Replacement: étape 2, image 2 de 2

    • Remove the rubber covers for the two screws located at the bottom of the screen.

    • Use a Phillips #00 screwdriver to remove the two 6.4 mm screws outlined in the image.

    Modifier

  4. Asus Vivobook Flip 14 TP410U LCD Assembly Replacement: étape 3, image 1 de 2 Asus Vivobook Flip 14 TP410U LCD Assembly Replacement: étape 3, image 2 de 2

    • Excessive force may cause damage to connections.

    • Rotate the screen 360 degrees for ease of access.

    • Place the opening tool at the corner of where the screen meets the base of the laptop.

    • Pry open the screen along the edge until it is completely off the front cover.

    • Disconnect each appropriate connector while opening up the laptop.

    Modifier

  5. Asus Vivobook Flip 14 TP410U LCD Assembly Replacement: étape 4, image 1 de 2 Asus Vivobook Flip 14 TP410U LCD Assembly Replacement: étape 4, image 2 de 2

    • Excessive force should avoided since damage may accrue.

    • Remove the cable that connects to the touch display, front camera, and motherboard.

    • Remove each piece of tape that holds down each cable.

    Modifier

  6. Asus Vivobook Flip 14 TP410U LCD Assembly Replacement: étape 5, image 1 de 1

    • Have the new LCD display fully unboxed and ready to be used.

    • Remove the old LCD display.

    • The touch screen sensor is extremely fragile, make sure to not put excessive force on the cable while assembling.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 4 autres contributeurs

Dominic Bento

Membre depuis le 03/22/22

305 Réputation

2 tutoriels rédigés

Badges: 5

+ 2 badges supplémentaires

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 7

30 derniers jours : 51

Total : 819