Introduction
This guide will show the reader how to replace their failing USB Port Plate with a new one. If devices plugged into the USB ports aren't connecting properly, the plate may need to be replaced.
Ce dont vous avez besoin
-
-
-
Slide the hard drive out of the SATA port and remove it from the device.
-
-
-
Remove the two 5.0 mm Phillips #1 screws shown.
-
Remove the two 3.0 mm Phillips #1 screws shown.
-
Presque terminé !
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.