Introduction

The battery is the main source of power to the computer. Often times batteries will lose charge and need to be replaced. If the laptop won't turn on without the power cable, use this guide to replace the battery.

Pièces

Aucune pièce nécessaire.

Before doing a replacement, make sure the laptop is fully shut off.
  • Before doing a replacement, make sure the laptop is fully shut off.

  • Using the JIS #0 Screwdriver, unscrew the ten 10 mm screws that hold the back casing in place.

Ajouter un commentaire

Pry open the back casing using the opening tool along the side crevice.
  • Pry open the back casing using the opening tool along the side crevice.

  • Try to use the opening tool at multiple points. Lifting the back casing abruptly could damage the laptop.

Ajouter un commentaire

  • Using the JIS #0 Screwdriver, remove the five 5.0 mm screws that hold down the battery.

Ajouter un commentaire

  • Disconnect the cable connected to the motherboard.

  • To remove, lift the ends using the opening tool.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Aymane Elbernoussi

Membre depuis le 14/02/2018

160 Réputation

1 tutoriel rédigé

Équipe

USF Tampa, Team S5-G5, Eyestone Spring 2018 Membre de l'équipe USF Tampa, Team S5-G5, Eyestone Spring 2018

USFT-EYESTONE-S18S5G5

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 3

Total : 116