Remove the battery, then unscrew the 7 3 mm Phillips screws behind the battery. Make sure they go in separate, organized piles.
  • Remove the battery, then unscrew the 7 3 mm Phillips screws behind the battery. Make sure they go in separate, organized piles.

  • Unscrew the 2 4 mm Phillips head screws by the battery.

Ajouter un commentaire

Remove the panel above the keyboard with a plastic spudger.
  • Remove the panel above the keyboard with a plastic spudger.

Ajouter un commentaire

  • Once the panel is removed, use the spudger to pry out the keyboard.

  • Do not fully remove, for the keyboard is still attached to the ribbon cable.

Ajouter un commentaire

  • Detach the ribbon cable from the keyboard by pulling the end of the ribbon cable that is attached inside of the laptop.

  • Be sure to detach from the root rather than from near the middle. It should slide out with ease.

  • Now you can fully remove the keyboard from the laptop.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Joe Redfearn

Membre depuis le 14/04/2014

101 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 13-29, Maness Spring 2014 Membre de l'équipe Cal Poly, Team 13-29, Maness Spring 2014

CPSU-MANESS-S14S13G29

4 membres

8 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 182