Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the two round rubber feet at the hinge-edge of the laptop.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the eleven 4 mm Phillips #00 screws from the back panel.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using a plastic opening tool pry the back panel off of the laptop.
-
Annulation : je n'ai pas terminé ce tutoriel.
2 autres ont terminé cette réparation.
Un commentaire
Some models may utilize Phillips #00 screws, but mine (and many others based on what I’ve now read) utilize Torx T5 screws around the edges of the panel.