Introduction

This guide will show you how to replace the motherboard on an Asus ZenBook UX303U laptop.

Pièces

Aucune pièce nécessaire.

Flip your laptop over so that the bottom is facing you.
  • Flip your laptop over so that the bottom is facing you.

  • Remove the nine 4mm Phillips #00 screws from the back panel.

Ajouter un commentaire

Insert the ifixit opening tool between back panel and the frame.
  • Insert the ifixit opening tool between back panel and the frame.

  • Lift to remove the back panel.

Ajouter un commentaire

  • Pull the battery cable out of its four retaining clips with either your fingers, or a plastic opening tool.

Ajouter un commentaire

  • Remove all seven 2mm Phillips #00 screws from the battery.

Ajouter un commentaire

  • Disconnect the speaker cable by pulling it out of its connector with a plastic opening tool.

  • Disconnect the battery cable by pulling it out of its connector with a plastic opening tool.

Ajouter un commentaire

  • Lift the battery up and pull out to remove.

  • Check underneath the battery for the wire assembly connecting the touchpad to the motherboard. This connection may stick to the underside of the battery. Be careful not to damage it when removing the battery.

Ajouter un commentaire

  • Disconnect the display cable from the motherboard with a plastic opening tool.

Ajouter un commentaire

  • Remove the three 6mm Phillips #00 screws from the hinge.

  • Remove the 2mm Phillips #00 screw from the plastic housing securing the fan into place.

Ajouter un commentaire

  • Lift the bottom of the laptop up slightly in order to unhinge the laptop.

  • Lift the screen assembly hinge up and off of the motherboard fan.

Ajouter un commentaire

  • Using tweezers, disconnect the cable connector from the motherboard fan.

Ajouter un commentaire

  • Lift the fan up and off of the white pegs that secure it into place.

Ajouter un commentaire

  • Remove eleven 4mm Phillips #00 screws.

Ajouter un commentaire

  • Disconnect all wires connecting the motherboard to the rest of the device.

  • For the two connectors marked in orange, lift the black clip up to release the wire.

  • For the wire marked in yellow, lift it straight up.

Ajouter un commentaire

  • Lift and remove the motherboard.

  • Pull the motherboard away from the ports on the side of the device to disconnect them from the computer before lifting the motherboard.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Dean Anderson

Membre depuis le 14/02/2018

325 Réputation

3 tutoriels rédigés

Équipe

USF Tampa, Team S3-G5, Nance Spring 2018 Membre de l'équipe USF Tampa, Team S3-G5, Nance Spring 2018

USFT-NANCE-S18S3G5

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 8

7 derniers jours : 25

30 derniers jours : 79

Total : 236