Aller au contenu principal

Atari Flashback 2 Reset and Select Button Replacement

Ce dont vous avez besoin

  1. Atari Flashback 2 Reset and Select Button Replacement, Reset or Select Button: étape 1, image 1 de 3 Atari Flashback 2 Reset and Select Button Replacement, Reset or Select Button: étape 1, image 2 de 3 Atari Flashback 2 Reset and Select Button Replacement, Reset or Select Button: étape 1, image 3 de 3
    • Using the screwdriver and the PH1 bit, unscrew the five 10.0 mm screws on the bottom of the console.

    • One screw is under the main sticker in the middle of the console.

  2. Atari Flashback 2 Reset and Select Button Replacement: étape 2, image 1 de 3 Atari Flashback 2 Reset and Select Button Replacement: étape 2, image 2 de 3 Atari Flashback 2 Reset and Select Button Replacement: étape 2, image 3 de 3
    • Unscrew the six 9.0 mm Phillips #1 screws on the brown circuit board that correspond to the reset and select buttons.

    • Remove gently. The circuit board is connected by wire to the console. Removing the cable from the console case may allow more slack.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Gabriel Robinson

Membre depuis le 09/17/18

85 Réputation

1 tutoriel rédigé

Équipe

Washington State, Team S1-G2, Hope Fall 2018 Membre de l'équipe Washington State, Team S1-G2, Hope Fall 2018

WSU-HOPE-F18S1G2

4 membres

11 tutoriels rédigés

2 commentaires

Good night! I have a flashback2 atari which burst the capacitor EC1, could you help me with its value? Thank you!

pradose - Réponse

Hi pradose! We no longer have the device so it will not be possible for our team to walk you through anything beyond the guides we posted.

Daniel Hoffman - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 5

30 derniers jours : 19

Total : 765