Réparez vos affaires Communauté Boutique

Atari Lynx Battery Wire Replacement

Introduction

Before starting this guide you may need some experience with soldering/ desoldering. If you do not know how, you can learn by clicking the link on step 5 (when you have to desolder the wires).

Ce dont vous avez besoin

  1. Atari Lynx Battery Wire Replacement, Atari Lynx: étape 1, image 1 de 1

    • Before disassembling your Atari Lynx, be sure the device is powered off.

    • Remove any game in the console by opening the right latch and sliding the game to the right.

    Modifier

  2. Atari Lynx Battery Wire Replacement: étape 2, image 1 de 1

    • Remove the four 35 mm Phillips #1 screws at each corner of the backside on the Atari Lynx.

    • Pinch the rear panel with your fingers and lift away from the Atari.

    Modifier

  3. Atari Lynx Battery Wire Replacement: étape 3, image 1 de 1

    • Remove the battery panel by pinching the sides with your fingers and lifting it away from the Atari.

    • Be sure not to tear any wires attached to battery panel.

    Modifier

  5. Atari Lynx Battery Wire Replacement: étape 4, image 1 de 1

    • Remove the control panel by pinching the sides with your fingers and lifting it away from the Atari.

    • Be sure not to tear the speaker wire while removing the control panel.

    Modifier

  6. Atari Lynx Battery Wire Replacement, Battery Wires: étape 5, image 1 de 1

    • Desolder both the black and red wire as shown.

    • If you need help with basic desoldering, click here.

    Modifier

  7. Atari Lynx Battery Wire Replacement: étape 6, image 1 de 1

    • Desolder the black wire as shown.

    Modifier

  8. Atari Lynx Battery Wire Replacement: étape 7, image 1 de 2 Atari Lynx Battery Wire Replacement: étape 7, image 2 de 2

    • Desolder the white wire and then the red wire as shown.

    Modifier

  9. Atari Lynx Battery Wire Replacement: étape 8, image 1 de 1

    • Desolder the white wire as shown in order for the battery pack to be completely removed from the device.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 5 autres contributeurs

John Lopez

Membre depuis le 01/27/14

443 Réputation

4 tutoriels rédigés

Badges: 9

+ 6 badges supplémentaires

Équipe

Cal Poly, Team 1-42, Maness Winter 2014 Membre de l'équipe Cal Poly, Team 1-42, Maness Winter 2014

CPSU-MANESS-W14S1G42

5 membres

16 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 11

Total : 1,715