Introduction
This guide will help your install a new driver.
Ce dont vous avez besoin
-
-
-
With a #0 phillips head, unscrew the three, 1 cm screws which are holding the driver (red wafer) in its bracket.
-
-
-
Remove the two wires, red and yellow, by de-soldering them from the driver using a soldering iron and desoldering wick. Reference Comment souder et dessouder des connexions.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
2 autres ont terminé cette réparation.
2 commentaires
where can i buy a replacement driver?
You can order parts directly from PARTS@ATUS.COM