Réparez vos affaires Communauté Boutique

Audio-Technica AT-LP60BK-BT Belt Drive Replacement

Introduction

This guide will deal with how to replace the broken or missing belt drive for Audio-Technica AT-LP60BK-BT Bluetooth Wireless Turntable. The rubber band could cause a malfunction and break after using a long time or under extreme temperatures.

Before using this guide, make sure the size of the new belt is designed specifically for this model to avoid motor overheat problem.

Ce dont vous avez besoin

  1. Audio-Technica AT-LP60BK-BT Belt Drive Replacement, Belt Drive: étape 1, image 1 de 2 Audio-Technica AT-LP60BK-BT Belt Drive Replacement, Belt Drive: étape 1, image 2 de 2

    • Open the top plastic cover and remove the record and rubber mat.

    Modifier

  2. Audio-Technica AT-LP60BK-BT Belt Drive Replacement: étape 2, image 1 de 2 Audio-Technica AT-LP60BK-BT Belt Drive Replacement: étape 2, image 2 de 2

    • Find the belt underneath the platter by rotating the platter to the correct place.

    • Remove the belt from the motor pulley.

    Modifier

  3. Audio-Technica AT-LP60BK-BT Belt Drive Replacement: étape 3, image 1 de 1

    • Take the platter off by pulling it straight up.

    Modifier

  4. Audio-Technica AT-LP60BK-BT Belt Drive Replacement: étape 4, image 1 de 2 Audio-Technica AT-LP60BK-BT Belt Drive Replacement: étape 4, image 2 de 2

    • Remove the old belt.

    Modifier

  6. Audio-Technica AT-LP60BK-BT Belt Drive Replacement: étape 5, image 1 de 1

    • Turn platter upside down.

    Modifier

  7. Audio-Technica AT-LP60BK-BT Belt Drive Replacement: étape 6, image 1 de 3 Audio-Technica AT-LP60BK-BT Belt Drive Replacement: étape 6, image 2 de 3 Audio-Technica AT-LP60BK-BT Belt Drive Replacement: étape 6, image 3 de 3

    • Place the new belt around the inner lap on the upside-down platter.

    • Make sure the rubber band is flat on the platter, with no flipping.

    Modifier

  8. Audio-Technica AT-LP60BK-BT Belt Drive Replacement: étape 7, image 1 de 1

    • Turn the platter around.

    • Grab the belt around with a finger through one of the holes in the platter.

    Modifier

  9. Audio-Technica AT-LP60BK-BT Belt Drive Replacement: étape 8, image 1 de 1

    • Put the platter straight down.

    Modifier

  10. Audio-Technica AT-LP60BK-BT Belt Drive Replacement: étape 9, image 1 de 1

    • Put the belt around the motor pulley.

    Modifier

  11. Audio-Technica AT-LP60BK-BT Belt Drive Replacement: étape 10, image 1 de 3 Audio-Technica AT-LP60BK-BT Belt Drive Replacement: étape 10, image 2 de 3 Audio-Technica AT-LP60BK-BT Belt Drive Replacement: étape 10, image 3 de 3

    • Test the function by spinning the platter and put the rubber mat into place.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 1 autre contributeur

Zonghao Li

Membre depuis le 01/20/21

208 Réputation

1 tutoriel rédigé

Badges: 5

+ 2 badges supplémentaires

Équipe

York University, Team S1-G15, Melo-Thaiss Winter 2021 Membre de l'équipe York University, Team S1-G15, Melo-Thaiss Winter 2021

YORK-MELO-THAISS-W21S1G15

1 membre

1 tutoriel rédigé

Un commentaire

Thank you so much!

Joe - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 13

7 derniers jours : 161

30 derniers jours : 738

Total : 7,755