Aller au contenu principal

Audiovox CDM-8910 LCD Screen Replacement

Ce dont vous avez besoin

  1. Audiovox CDM-8910 LCD Screen Replacement, LCD Screen: étape 1, image 1 de 1
    • With phone in the flipped-open position, use a spudger to remove the four (4) rubber pads (one shown in red circle) located near the corners of the face with the LCD screen.

  2. Audiovox CDM-8910 LCD Screen Replacement: étape 2, image 1 de 1
    • Use a small Phillips head screwdriver to remove the four (4) screws exposed by removed rubber pads.

  3. Audiovox CDM-8910 LCD Screen Replacement: étape 3, image 1 de 1
    • Use a spudger to pry the front cover off of the phone, gradually working your way around the front face.

  4. Audiovox CDM-8910 LCD Screen Replacement: étape 4, image 1 de 1
    • Use a spudger to lift away and remove the metallic frame (in blue).

    • Use the spudger to lift away the two electrical contacts (in red).

    • Use the spudger to lift away the speaker (in yellow).

  5. Audiovox CDM-8910 LCD Screen Replacement: étape 5, image 1 de 1
    • This is what the rear of the LCD screen should look like before proceeding. Note all necessary connections are undone.

  6. Audiovox CDM-8910 LCD Screen Replacement: étape 6, image 1 de 1
    • Use a spudger to lift away the LCD screen.

  7. Audiovox CDM-8910 LCD Screen Replacement: étape 7, image 1 de 1
    • LCD screen successfully removed!

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Kevin Jafarey

Membre depuis le 10/04/10

11 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 3-24, Regan Fall 2010 Membre de l'équipe Cal Poly, Team 3-24, Regan Fall 2010

CPSU-REGAN-F10S3G24

4 membres

12 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 5

Total : 2,896