Aller au contenu principal

Introduction

This is a basic guide to disassembling your Cecotec Power Matic-Ccino 7000 or Rooma RM-A7 to access the core components of the appliance.  If you are noticing issues with the burr grinder, water pump, heating element, control board, or any other component on the interior of the device, this guide will instruct you on how to access those parts.  This will also allow you to open up the machine for cleaning and descaling of the brewing components.

  1. Using a T10 screwdriver, remove the eight screws located on the rear panel of the device (4 towards the bottom, and 4 towards the top). Using a T10 screwdriver, remove the eight screws located on the rear panel of the device (4 towards the bottom, and 4 towards the top).
    • Using a T10 screwdriver, remove the eight screws located on the rear panel of the device (4 towards the bottom, and 4 towards the top).

  2. Unscrew one PH2 screw. Use a spudger or a thin curved tool such as a dental pick to remove the bean hopper of the burr grinder.
    • Unscrew one PH2 screw.

    • Use a spudger or a thin curved tool such as a dental pick to remove the bean hopper of the burr grinder.

    • Remove the grind selector by pulling the dial directly away from the machine which will remove it from the housing.

  3. The Hex screw must be unscrewed in the clockwise direction.  Failure to do so could result in damage of the grinding mechanism. Unscrew the one 4mm Hex in a clockwise fashion and remove the black plastic cover over the burrset.
    • The Hex screw must be unscrewed in the clockwise direction. Failure to do so could result in damage of the grinding mechanism.

    • Unscrew the one 4mm Hex in a clockwise fashion and remove the black plastic cover over the burrset.

    • Remove the black plastic cover over the burr set.

    • The burr set should not be completely visible.

  4. Unscrew the three PH2 screws. Slide the top panel backwards to remove it.
    • Unscrew the three PH2 screws.

    • Slide the top panel backwards to remove it.

  5. Now you should have access to the internal components of the appliance. Now you should have access to the internal components of the appliance. Now you should have access to the internal components of the appliance.
    • Now you should have access to the internal components of the appliance.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Egas

Membre depuis le 20/09/2010

161 Réputation

1 tutoriel rédigé

Équipe

Zi repair Membre de l'équipe Zi repair

Business

1 membre

1 tutoriel rédigé

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 14

30 derniers jours : 83

Total : 975