Réparez vos affaires Communauté Boutique

Autosampler Battery Replacement & Voltage Check (For Old & New Versions)

Ce dont vous avez besoin

  1. Autosampler Battery Replacement & Voltage Check (For Old & New Versions), Disconnect the batteries completely: étape 1, image 1 de 3 Autosampler Battery Replacement & Voltage Check (For Old & New Versions), Disconnect the batteries completely: étape 1, image 2 de 3 Autosampler Battery Replacement & Voltage Check (For Old & New Versions), Disconnect the batteries completely: étape 1, image 3 de 3

    • 1. Disconnect the plug to the solar panel (yellow circle).

    • Then, grabbing the green connector and pull the battery connector from the solar charge controller (blue arrow).

    • This will be done inside the node. It was removed from the node to make it easier to see for the tutorial.

    • 2. Disconnect the plugs for the autosampler battery.

    • 3. Disconnect the connector that plugs into the battery port of the sampler.

    • If disconnect battery before solar panel, this can damage the solar charger!

    Modifier

  3. Autosampler Battery Replacement & Voltage Check (For Old & New Versions), Checking battery voltages: étape 2, image 1 de 3 Autosampler Battery Replacement & Voltage Check (For Old & New Versions), Checking battery voltages: étape 2, image 2 de 3 Autosampler Battery Replacement & Voltage Check (For Old & New Versions), Checking battery voltages: étape 2, image 3 de 3

    • 4. Make sure multimeter is measuring in DC current (red boxes).

    • Make sure multimeter is measuring in Volts (blue box).

    • 5. Check the voltage of the lead acid autosampler battery. Fully charged lead acid battery should be around 13-14 V.

    • Remember: Red to red and black to black!

    • 6. Check the voltage of the lithium ion node battery. Fully charged lithium ion battery should around 4 V.

    Modifier

  4. Autosampler Battery Replacement & Voltage Check (For Old & New Versions), Reconnect the batteries: étape 3, image 1 de 3 Autosampler Battery Replacement & Voltage Check (For Old & New Versions), Reconnect the batteries: étape 3, image 2 de 3 Autosampler Battery Replacement & Voltage Check (For Old & New Versions), Reconnect the batteries: étape 3, image 3 de 3

    • 7. First reconnect the autosampler battery (black box).

    • 8. Then reconnect lithium ion battery in the node (blue box).

    • Remember to plug in the other connector into the autosampler.

    • 9. Secure solar charge controller to the side of the enclosure using velcro (red box).

    • Then plug in the solar panel last (orange box).

    Modifier
Ligne d'arrivée

3 autres ont terminé cette réparation.

Auteur

avec 1 autre contributeur

Brooke Mason

Membre depuis le 05/29/19

2 928 Réputation

17 tutoriels rédigés

Badges: 21

+ 18 badges supplémentaires

Équipe

Open-Storm Membre de l'équipe Open-Storm

Community

14 membres

24 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 150