Aller au contenu principal
  1. To enable manual mode, flip the switch to "Business as usual" LCD screen will turn on
    • To enable manual mode, flip the switch to "Business as usual"

    • LCD screen will turn on

  2. Press Stop Press Start Sampling Press Enter
    • Press Stop

    • Press Start Sampling

    • Press Enter

  3. Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now

    Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now
  4. Enter in the bottle you would like to start sampling at Press Enter LCD should now show which bottle it will take a sample in
    • Enter in the bottle you would like to start sampling at

    • Press Enter

    • LCD should now show which bottle it will take a sample in

  5. To enable autonomous mode, flip switch to "Shut up and take my samples" LCD should turn off If the autosampler is to be remotely triggered, avoid using the ON/OFF button to power off the sampler.
    • To enable autonomous mode, flip switch to "Shut up and take my samples"

    • LCD should turn off

    • If the autosampler is to be remotely triggered, avoid using the ON/OFF button to power off the sampler.

Conclusion

Now the sampler is ready to be triggered remotely by an open-storm sensor node.

Brandon Wong

Membre depuis le 16/01/2018

429 Réputation

2 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 7

Total : 215