Introduction

This guide will show you a step by step guide on how to replace a camera on the BLU Studio 5.0 S II.

Remove the back cover of phone with the plastic opening tool.
  • Remove the back cover of phone with the plastic opening tool.

Ajouter un commentaire

Remove the battery with the plastic opening tool.
  • Remove the battery with the plastic opening tool.

Ajouter un commentaire

  • Use the Philips #00 screwdriver to remove the nine screws that the top back part of the phone has.

Ajouter un commentaire

  • Once you take off the screws off the phone remove the plastic backing .

Ajouter un commentaire

  • Remove the ribbon cable carefully on all four sides of the motherboard of the phone.

Ajouter un commentaire

  • Take off the four interior screws that are on the motherboard of the phone.

Ajouter un commentaire

  • Remove the ribbon cable next to the camera carefully.

Ajouter un commentaire

  • Remove the motherboard of the phone and replace camera.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Maria Juzaino

Membre depuis le 25/10/2014

493 Réputation

3 tutoriels rédigés

Équipe

Gateway, Team 1-3, Johnson Fall 2014 Membre de l'équipe Gateway, Team 1-3, Johnson Fall 2014

GCC-JOHNSON-F14S1G3

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 3

Total : 1,891