Introduction
In this guide, you will learn how to remove and replace the individual LED lights inside the device
Ce dont vous avez besoin
-
-
Place the device face down on a flat surface, so that the screws on the back are facing the ceiling.
Demander à FixBot
-
-
-
Using a screwdriver loosen the four screws connecting the body of the device together.
-
-
-
Once unscrewed, pop the back of the device off using the plastic opening tool.
-
-
-
-
Once unscrewed, take the back of the body and put it aside. We will be working with the front part of the device.
-
-
-
Using a plastic opening tool pop the light panel off. Be careful as to not rip any of the wires from the panel.
-
-
Outil utilisé dans cette étape :Tweezers$4.99
-
Carefully pull the LED lights off with a pair of tweezers. Once off, put in and connect a replacement.
-
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.
Équipe
USF Tampa, Team 2-2, Sullivan Fall 2015 Membre de l'équipe USF Tampa, Team 2-2, Sullivan Fall 2015
USFT-SULLIVAN-F15S2G2
4 membres
15 tutoriels rédigés
