Aller au contenu principal

Beats Pill 1.0 Battery Replacement

Ce dont vous avez besoin

  1. Beats Pill 1.0 Battery Replacement, Removing the Case Screws: étape 1, image 1 de 3 Beats Pill 1.0 Battery Replacement, Removing the Case Screws: étape 1, image 2 de 3 Beats Pill 1.0 Battery Replacement, Removing the Case Screws: étape 1, image 3 de 3
    • Using the spudger, create space between the speaker covers and then remove.

    • On the underside of the device, remove the rubber stand with the BeatsPill logo on it.

    • Using an ESD-safe Phillips #0 screwdriver, remove the four screws that were underneath the rubber stand.

    I bought a brand new Beats Pill 1.0 online last week the first night it seemed to work all right the next day I charged it I plugged it in and it was crackling on the left hand side from the front and now the whole volume of both sides very low but it is still getting a Bluetooth connectivity I tried to reset it by holding the baby and the power button to get this thing in the back to flag it would not reset that way any suggestions I meant it is for a lot of money I paid $170 I thought I was getting a brand new device

    Steven Sudnick - Réponse

  2. Beats Pill 1.0 Battery Replacement, Removing Center Cover: étape 2, image 1 de 3 Beats Pill 1.0 Battery Replacement, Removing Center Cover: étape 2, image 2 de 3 Beats Pill 1.0 Battery Replacement, Removing Center Cover: étape 2, image 3 de 3
    • Remove the two screws with a Phillips #0 screwdriver.

    • Slowly remove the center band and two clip rings until the adhesive separates. Sit to the side the clip rings and the center band

  3. Beats Pill 1.0 Battery Replacement, Separate the Device: étape 3, image 1 de 3 Beats Pill 1.0 Battery Replacement, Separate the Device: étape 3, image 2 de 3 Beats Pill 1.0 Battery Replacement, Separate the Device: étape 3, image 3 de 3
    • Use the spudger to pry the device apart along its seam, starting in the middle.

    • Open the device to separate the front and back panels.

  4. Beats Pill 1.0 Battery Replacement, Disconnect Speaker Wiring: étape 4, image 1 de 2 Beats Pill 1.0 Battery Replacement, Disconnect Speaker Wiring: étape 4, image 2 de 2
    • Carefully remove the yellow, red, black, and white wires from the motherboard.

    • Ground yourself when touching the motherboard.

  5. Beats Pill 1.0 Battery Replacement, Disconnect NFC Sensor Wiring: étape 5, image 1 de 2 Beats Pill 1.0 Battery Replacement, Disconnect NFC Sensor Wiring: étape 5, image 2 de 2
    • Carefully remove the black and red NFC sensor wires.

  6. Beats Pill 1.0 Battery Replacement, Disconnect Control Wiring: étape 6, image 1 de 2 Beats Pill 1.0 Battery Replacement, Disconnect Control Wiring: étape 6, image 2 de 2
    • Carefully remove the control cables (4 black, 1 red).

  7. Beats Pill 1.0 Battery Replacement, Battery: étape 7, image 1 de 1
    Outil utilisé dans cette étape :
    Phillips #0 Screwdriver
    $5.49
    J'achète
  8. Beats Pill 1.0 Battery Replacement, Remove motherboard screws: étape 8, image 1 de 1
    Outil utilisé dans cette étape :
    Phillips #0 Screwdriver
    $5.49
    J'achète
    • Using the same screwdriver, remove the motherboard screws along with the rubber stoppers.

  9. Beats Pill 1.0 Battery Replacement, Remove the motherboard: étape 9, image 1 de 1
    Outil utilisé dans cette étape :
    Tweezers
    $4.99
    J'achète
    • Gently remove the motherboard from the case

    • Remove the yellow NFC module with Tweezers

    Is this two batteries we need to replace? Or is just the right one the battery?

    delliskd - Réponse

    The batteries I bought from Amazon came with two batteries alreaded connected to one another. One one set of leads needs to be soldered

    Scott Carpenter - Réponse

    Where is the yellow NFC module in the photo? I do not think there is a picture of it removed.

    salcampana - Réponse

    You see a part of it on Photoshop step 7, on the top, it’s stuck behind the motherboard screws, just lift it loose with a tweezer or something, it could be a little bit ‘glued’/fixed to its surroundings. After battery change, just put it back, does not need any fixation.

    lofors -

  10. Beats Pill 1.0 Battery Replacement, Remove the power button: étape 10, image 1 de 1
    • Remove power button and springs.

  11. Beats Pill 1.0 Battery Replacement, Cut off battery: étape 11, image 1 de 1
    • Cut off the battery wires

  12. Beats Pill 1.0 Battery Replacement, Attach new battery: étape 12, image 1 de 1
    • Using a soldering iron attach the new battery to the motherboard with the red wire connecting to the 0.2 volts (+) and black wire connecting to the ground (-). See the soldering guide for more information on how to perform this step.

Conclusion

To reassemble your device, follow these instructions in reverse order.

28 autres ont terminé cette réparation.

Paul Haas

Membre depuis le 01/13/15

778 Réputation

2 tutoriels rédigés

Équipe

USF Tampa, Team 3-2, Hickman Winter 2015 Membre de l'équipe USF Tampa, Team 3-2, Hickman Winter 2015

USFT-HICKMAN-W15S3G2

4 membres

6 tutoriels rédigés

10 commentaires

donde puedo comprar la batttery para pill beats

felix - Réponse

Where can you buy the replacement battery

wtmcclure - Réponse

I got a replacement battery for 2.0 from Amazon, it works great! here is the link:

https://www.amazon.com/dp/B072PHZ235

And it also has battery for pill 1.0, pill XL...

Jailene -

Could you please tell what is the yellow card in the last picture?

jmestascatcoparco - Réponse

Looks like the Bluetooth antenna

James Jenkins -

It is the NFC module

bobapunk -

Are there two batteries in this thing, or is the left black box a different part?

delliskd - Réponse

hello, my dear friend, we have remplacement battery for Beat Pill 2.0. are you interested in introducing it? feel free to contact me.

kevin zhang - Réponse

I bought a cheap speaker for no where near the price of what the pill cost me. The battery never runs out! I have had it for years! The pill on the other hand I have changed one already and does not even turn on! Beats should be ashamed for charging what they do for such a poor product with a expensive price tag! And now I’m expected to open it up myself and change the battery! I feel completely mugged off by BEATS. You know that saying about the more expensive the better the product? It’s a 100% lies! Don’t be fooled by a label! Most of the things you purchase are made in China or India and sent to another country where they are stamped and claim it’s made in that county. Wake up people !

Alex - Réponse

Oh man 🙈 kann ich die auch einfach zu euch einsenden? 😂

Irina W - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 7

7 derniers jours : 73

30 derniers jours : 367

Total : 144,586