Introduction
In this guide, the process of speaker replacement is shown.
Ce dont vous avez besoin
-
-
Using a plastic opening tool, pry the casing from the rest of the device.
-
Pry all the way around the edge and then pull apart.
-
-
-
-
Gently pull on the plastic tab at the base of the ribbon cable to remove it from the motherboard.
Hola amigos y amigas como estan me pueden ayudar como puedo conseguier la placa del beatspill esta q esta aki xf urgente soy de Ecuador ciudad manta
-
-
-
Using your thumb and index finger, pull upwards on the base of the the power cable to remove it from the motherboard.
Hola nesecito esa placa xf alguien q me diga como la consigo
Ye bluetooth order krna hai
-
-
-
After completing the guide for removing the case, remove the cables connecting the speakers.
-
Simply pull up on them without pulling on the wires themselves.
-
-
-
While holding the case with one hand, pull up on the speaker you wish to replace.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
2 autres ont terminé cette réparation.
5 commentaires
Where can I find replacement speakers?
Please
Where can I find the replacement speakers..??