Réparez vos affaires Communauté Boutique

Beiens Cartoon RC Race Car LED Light Replacement

Introduction

This guide requires you to use a soldering iron that can be dangerous if you do not know how to use it. I suggest looking at iFixit's Soldering Guide.

Ce dont vous avez besoin

  1. Beiens Cartoon RC Race Car LED Light Replacement, LED Light: étape 1, image 1 de 1

    • Hold the remote control with the backside facing you and, using the Phillips #00 screwdriver, unscrew the six 6.5 mm screws on the back of the controller that hold it together.

    Modifier

  2. Beiens Cartoon RC Race Car LED Light Replacement: étape 2, image 1 de 1

    • Open the remote control.

    Modifier

  4. Beiens Cartoon RC Race Car LED Light Replacement: étape 3, image 1 de 1

    • Lift the motherboard to separate it from the remote control.

    Modifier

  5. Beiens Cartoon RC Race Car LED Light Replacement: étape 4, image 1 de 1

    • To remove the light, use a soldering iron to heat the solder to a liquid and loosen the leads.

    • While the solder is liquid, lightly pull on the LED to remove it from the motherboard.

    • The soldering iron will get very hot while it's in use. Be sure to place it on top of a heat protected surface and be careful not to touch the operational end.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

Amber Ashley

Membre depuis le 10/01/15

329 Réputation

4 tutoriels rédigés

Badges: 8

+ 5 badges supplémentaires

Équipe

USF Tampa, Team 1-6, Leahy Fall 2015 Membre de l'équipe USF Tampa, Team 1-6, Leahy Fall 2015

USFT-LEAHY-F15S1G6

3 membres

8 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 7

Total : 267