Réparez vos affaires Communauté Boutique

Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement

Introduction

Follow these instructions to remove the throttle cable, either to replace it or to service the throttle control.

Ce dont vous avez besoin

  1. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement, Throttle Cable: étape 1, image 1 de 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement, Throttle Cable: étape 1, image 2 de 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement, Throttle Cable: étape 1, image 3 de 3

    • Cut and remove any zip ties securing the throttle cable.

    Modifier

  2. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: étape 2, image 1 de 2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: étape 2, image 2 de 2

    • Use a Phillips #2 driver to remove the screw securing the lower end of the throttle cable.

    Modifier

  3. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: étape 3, image 1 de 2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: étape 3, image 2 de 2

    • Remove the bracket securing the lower end of the throttle cable.

    Modifier

  5. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: étape 4, image 1 de 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: étape 4, image 2 de 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: étape 4, image 3 de 3

    • Rotate the lower end of the throttle cable to detach it from the throttle.

    Modifier

  6. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: étape 5, image 1 de 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: étape 5, image 2 de 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: étape 5, image 3 de 3

    • When reinstalling the throttle control cable, check to make sure that the throttle control moves the throttle through its full range of motion.

    • If necessary, loosen the screw securing the lower end of the throttle cable and adjust the position of the cable. Re-tighten the screw and check to make sure that the throttle moves through its full range of motion.

    Modifier

  7. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: étape 6, image 1 de 2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: étape 6, image 2 de 2

    • Use a 7/16" wrench or deep socket to remove the cap from the throttle control.

    Modifier

  8. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: étape 7, image 1 de 2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: étape 7, image 2 de 2

    • Advance the throttle control to expose the gear rack containing the upper end of the throttle cable.

    Modifier

  9. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: étape 8, image 1 de 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: étape 8, image 2 de 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: étape 8, image 3 de 3

    • Separate the gear rack from the upper end of the throttle cable.

    • Lift and remove the gear rack from the throttle control.

    • If the gear rack doesn't fully detach, advance the throttle control lever a little farther.

    • Lubricate the gear rack with a bit of lithium grease during reassembly.

    Modifier

  10. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: étape 9, image 1 de 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: étape 9, image 2 de 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: étape 9, image 3 de 3

    • Use a 1/2" wrench to unscrew the upper end of the throttle cable from the throttle control.

    • Slide the throttle cable down out of the bottom of the throttle control, and remove the cable.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

Jeff Suovanen

Membre depuis le 08/06/13

428 957 Réputation

259 tutoriels rédigés

Badges: 48

+ 45 badges supplémentaires

Équipe

iFixit Membre de l'équipe iFixit

Staff

136 membres

17 410 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 9

30 derniers jours : 33

Total : 1,897