Réparez vos affaires Communauté Boutique

Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement

Introduction

Follow these instructions to replace a damaged throttle control. Optionally, you may also replace the attached throttle control cable.

Ce dont vous avez besoin

  1. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement, Throttle Cable: étape 1, image 1 de 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement, Throttle Cable: étape 1, image 2 de 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement, Throttle Cable: étape 1, image 3 de 3

    • Cut and remove any zip ties securing the throttle cable.

    Modifier

  2. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: étape 2, image 1 de 2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: étape 2, image 2 de 2

    • Use a Phillips #2 driver to remove the screw securing the lower end of the throttle cable.

    Modifier

  3. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: étape 3, image 1 de 2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: étape 3, image 2 de 2

    • Remove the bracket securing the lower end of the throttle cable.

    Modifier

  4. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: étape 4, image 1 de 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: étape 4, image 2 de 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: étape 4, image 3 de 3

    • Rotate the lower end of the throttle cable to detach it from the throttle.

    Modifier

  6. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: étape 5, image 1 de 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: étape 5, image 2 de 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: étape 5, image 3 de 3

    • When reinstalling the throttle control cable, check to make sure that the throttle control moves the throttle through its full range of motion.

    • If necessary, loosen the screw securing the lower end of the throttle cable and adjust the position of the cable. Re-tighten the screw and check to make sure that the throttle moves through its full range of motion.

    Modifier

  7. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: étape 6, image 1 de 2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: étape 6, image 2 de 2

    • Use a 7/16" wrench or deep socket to remove the cap from the throttle control.

    Modifier

  8. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: étape 7, image 1 de 2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: étape 7, image 2 de 2

    • Advance the throttle control to expose the gear rack containing the upper end of the throttle cable.

    Modifier

  9. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: étape 8, image 1 de 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: étape 8, image 2 de 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: étape 8, image 3 de 3

    • Separate the gear rack from the upper end of the throttle cable.

    • Lift and remove the gear rack from the throttle control.

    • If the gear rack doesn't fully detach, advance the throttle control lever a little farther.

    • Lubricate the gear rack with a bit of lithium grease during reassembly.

    Modifier

  10. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: étape 9, image 1 de 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: étape 9, image 2 de 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: étape 9, image 3 de 3

    • Use a 1/2" wrench to unscrew the upper end of the throttle cable from the throttle control.

    • Slide the throttle cable down out of the bottom of the throttle control, and remove the cable.

    Modifier

  11. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement, Throttle Control: étape 10, image 1 de 2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement, Throttle Control: étape 10, image 2 de 2

    • Use a Phillips #2 driver to remove the two screws securing the throttle control.

    • While removing the screws, use a 3/8" wrench to counter-hold the lock nuts and prevent them from rotating.

    Modifier

  12. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: étape 11, image 1 de 2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: étape 11, image 2 de 2

    • Remove the throttle control.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autres ont terminé cette réparation.

Auteur

Jeff Suovanen

Membre depuis le 08/06/13

428 957 Réputation

259 tutoriels rédigés

Badges: 48

+ 45 badges supplémentaires

Équipe

iFixit Membre de l'équipe iFixit

Staff

136 membres

17 410 tutoriels rédigés

Un commentaire

the part # is incorrect, it appears that it is 440014 not 440013

JACOB - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 5

30 derniers jours : 19

Total : 997