Réparez vos affaires Communauté Boutique

Bissell Pet Hair Eraser Motherboard Replacement

Introduction

The Bissell Pet Hair Erasers motherboard is accessible using this guide. This guide will show you how to replace the motherboard.

Ce dont vous avez besoin

  1. Bissell Pet Hair Eraser Motherboard Replacement, Dirt Cup: étape 1, image 1 de 2 Bissell Pet Hair Eraser Motherboard Replacement, Dirt Cup: étape 1, image 2 de 2

    • Firmly grasp the handle and press the release button.

    • Gently pull the dirt cup down and away from the vacuum body.

    Traduire

  2. Bissell Pet Hair Eraser Motherboard Replacement, Power Button: étape 2, image 1 de 2 Bissell Pet Hair Eraser Motherboard Replacement, Power Button: étape 2, image 2 de 2

    • Remove the six 1.2 mm Philips #2 screws from the handle and base.

    Traduire

  3. Bissell Pet Hair Eraser Motherboard Replacement: étape 3, image 1 de 2 Bissell Pet Hair Eraser Motherboard Replacement: étape 3, image 2 de 2

    • Grasp each half of the body and gently pull apart.

    • The green handle, power button, charge light lens, and dirt cup release are not fastened in place.

    • Once the case is split apart these items may come dislodged.

    Traduire

  5. Bissell Pet Hair Eraser Motherboard Replacement: étape 4, image 1 de 3 Bissell Pet Hair Eraser Motherboard Replacement: étape 4, image 2 de 3 Bissell Pet Hair Eraser Motherboard Replacement: étape 4, image 3 de 3

    • The power button can be removed by gently lifting it off the circuitry.

    Traduire

  6. Bissell Pet Hair Eraser Motherboard Replacement, Motherboard: étape 5, image 1 de 2 Bissell Pet Hair Eraser Motherboard Replacement, Motherboard: étape 5, image 2 de 2

    • Remove the battery plastic hold down by lifting it off the tabs.

    • Remove the battery by lifting straight up.

    • Position the battery aside.

    Traduire

  7. Bissell Pet Hair Eraser Motherboard Replacement: étape 6, image 1 de 3 Bissell Pet Hair Eraser Motherboard Replacement: étape 6, image 2 de 3 Bissell Pet Hair Eraser Motherboard Replacement: étape 6, image 3 de 3

    • Grasp the charger port and remove it by lifting it straight out of the case.

    • Set the charger port next to the battery.

    Traduire

  8. Bissell Pet Hair Eraser Motherboard Replacement: étape 7, image 1 de 2 Bissell Pet Hair Eraser Motherboard Replacement: étape 7, image 2 de 2

    • Remove the power button and charge LED light by gently pulling straight out of the case.

    • The vacuum motor can be removed by pulling straight out of the case.

    • All internals are now removed.

    • Set the case halves aside.

    Traduire

  9. Bissell Pet Hair Eraser Motherboard Replacement: étape 8, image 1 de 1

    • Remove the two 1 mm Phillips #2 screws in the shown locations.

    Traduire

  10. Bissell Pet Hair Eraser Motherboard Replacement: étape 9, image 1 de 2 Bissell Pet Hair Eraser Motherboard Replacement: étape 9, image 2 de 2

    • Disconnect the power leads from the vacuum motor.

    • The red power lead goes on the terminal with the visible red dot.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 3 autres contributeurs

Jim Lopez

Membre depuis le 09/20/18

586 Réputation

5 tutoriels rédigés

Badges: 7

+ 4 badges supplémentaires

Équipe

Central Washington University, Team S1-G1, Pengilly Fall 2018 Membre de l'équipe Central Washington University, Team S1-G1, Pengilly Fall 2018

CWU-PENGILLY-F18S1G1

4 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 9

Total : 351