Réparez vos affaires Communauté Boutique

Bissell SpotClean ProHeat 5207U Water Pump Replacement

Introduction

Is your Bissell SpotClean ProHeat 5207U not spraying water? It could be because of a failing water pump. Follow this guide to replace the water pump for your Bissell SpotClean ProHeat 5207U.

Ce dont vous avez besoin

  1. Bissell SpotClean ProHeat 5207U Water Pump Replacement, Water Pump: étape 1, image 1 de 2 Bissell SpotClean ProHeat 5207U Water Pump Replacement, Water Pump: étape 1, image 2 de 2

    • Ensure the device is unplugged.

    • Make sure that you have removed both the clean and dirty water tank so that you can unscrew the proper screws.

    • Remove the marked 19.7 mm screws on the underside of the device using the Phillips #00 screwdriver.

    Modifier

  2. Bissell SpotClean ProHeat 5207U Water Pump Replacement: étape 2, image 1 de 3 Bissell SpotClean ProHeat 5207U Water Pump Replacement: étape 2, image 2 de 3 Bissell SpotClean ProHeat 5207U Water Pump Replacement: étape 2, image 3 de 3

    • Remove the plastic top located where the dirty water tank was previously situated.

    • Using the Phillips #00 screwdriver, unscrew the three 17.2 mm screws.

    • Remove the plastic lip that was previously held by the screws.

    Modifier

  4. Bissell SpotClean ProHeat 5207U Water Pump Replacement: étape 3, image 1 de 2 Bissell SpotClean ProHeat 5207U Water Pump Replacement: étape 3, image 2 de 2

    • Using pliers, pinch the hose clamp tabs together, then remove the clamp.

    • Remove the water hose from the water pump.

    Modifier

  5. Bissell SpotClean ProHeat 5207U Water Pump Replacement: étape 4, image 1 de 2 Bissell SpotClean ProHeat 5207U Water Pump Replacement: étape 4, image 2 de 2

    • Remove the green wire by pulling it away from the pump.

    • Be careful not to bend where the wire is plugged into.

    Modifier

  6. Bissell SpotClean ProHeat 5207U Water Pump Replacement: étape 5, image 1 de 2 Bissell SpotClean ProHeat 5207U Water Pump Replacement: étape 5, image 2 de 2

    • Pull the clear hose away from the pump until it is removed.

    Modifier

  7. Bissell SpotClean ProHeat 5207U Water Pump Replacement: étape 6, image 1 de 2 Bissell SpotClean ProHeat 5207U Water Pump Replacement: étape 6, image 2 de 2

    • Remove the zip tie from the water pump.

    • Replace the old water pump with the new water pump.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Auteur

avec 4 autres contributeurs

Trenton Hedgecock

Membre depuis le 09/13/23

178 Réputation

1 tutoriel rédigé

Badges: 8

+ 5 badges supplémentaires

Équipe

University of North Texas, Team 6-4, Kilpatrick Fall 2023 Membre de l'équipe University of North Texas, Team 6-4, Kilpatrick Fall 2023

UNT-KILPATRICK-F23S6G4

4 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 16

Total : 132