Réparez vos affaires Communauté Boutique

Bissell Zing 2156A Rear Wheel Replacement

Introduction

Like most canister vacuums, this unit uses wheels to help keep it mobile for a variety of floor types. The Bissell Zing 2156A uses three total wheels: one swivel wheel in front and two side wheels. If the vacuum's wheels are stuck, replacing these can be a great way to get it going again.

Hair or other debris can get behind these wheels, and by their nature, these wheels are often right where messes are, so gloves might be advisable. Otherwise, this is an easy repair!

  1. Bissell Zing 2156A Rear Wheel Replacement, Rear Wheel: étape 1, image 1 de 1

    • Remove the dust tank, so the vacuum can lie upside down easily.

    • Press the grey button while pulling up.

    Traduire

  3. Bissell Zing 2156A Rear Wheel Replacement: étape 2, image 1 de 1

    • Flip the vacuum upside down.

    Traduire

  4. Bissell Zing 2156A Rear Wheel Replacement: étape 3, image 1 de 3 Bissell Zing 2156A Rear Wheel Replacement: étape 3, image 2 de 3 Bissell Zing 2156A Rear Wheel Replacement: étape 3, image 3 de 3

    • Place your hand inside between the wheel and vacuum and pry the wheel off.

    • Repeat with the other side.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 4 autres contributeurs

Terrance

Membre depuis le 02/14/24

280 Réputation

3 tutoriels rédigés

Badges: 5

+ 2 badges supplémentaires

Équipe

University of Memphis, Team 3-4, Sneed Spring 2024 Membre de l'équipe University of Memphis, Team 3-4, Sneed Spring 2024

UM-SNEED-S24S3G4

4 membres

7 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 2

30 derniers jours : 10

Total : 62