Aller au contenu principal

Black and Decker BDH9600CHV Power Switch Replacement

Ce dont vous avez besoin

  1. Black and Decker BDH9600CHV Power Switch Replacement, Power Switch: étape 1, image 1 de 3 Black and Decker BDH9600CHV Power Switch Replacement, Power Switch: étape 1, image 2 de 3 Black and Decker BDH9600CHV Power Switch Replacement, Power Switch: étape 1, image 3 de 3
    • To remove the filter and housing, press the green button labeled "Filter".

  2. Black and Decker BDH9600CHV Power Switch Replacement: étape 2, image 1 de 1
    • Unscrew and remove all 5 screws using the Phillips 0 screw bit. Each screw is 17.5 mm long.

  3. Black and Decker BDH9600CHV Power Switch Replacement: étape 3, image 1 de 2 Black and Decker BDH9600CHV Power Switch Replacement: étape 3, image 2 de 2
    • Pull the housing apart.

    • When you pull the housing apart, pieces may fall out. Be sure to track of the parts and where they go.

    • Remove the switch by pulling it out.

  4. Black and Decker BDH9600CHV Power Switch Replacement: étape 4, image 1 de 2 Black and Decker BDH9600CHV Power Switch Replacement: étape 4, image 2 de 2
    • Replace the new switch by sliding the replacement switch onto the top of the switch mechanism located on the motor.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Ivette Muzquiz

Membre depuis le 11/06/17

349 Réputation

3 tutoriels rédigés

Équipe

IUPUI, Team S1-G4, Harley Fall 2017 Membre de l'équipe IUPUI, Team S1-G4, Harley Fall 2017

IUPUI-HARLEY-F17S1G4

3 membres

3 tutoriels rédigés

Un commentaire

My switch with up & down button box like

Fernando Palacios - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 8

Total : 1,132