1. Before disassembling the blender base, make sure the blender disconnected from any power outlet.
    • Before disassembling the blender base, make sure the blender disconnected from any power outlet.

    • Lift the jar straight up from the base without tilting the jar.

    Ajouter un commentaire

  2. Remove the top three 1/4 inch base screws using a Philip's head screwdriver.
    • Remove the top three 1/4 inch base screws using a Philip's head screwdriver.

    Ajouter un commentaire

    • Remove the two base leg covers next to the power cord using pliers or a flat-head screwdriver.

    • This provides access to the base screws beneath.

    Ajouter un commentaire

    • Remove the following screws that secure the top and bottom halves of the base.

      • One 1/4 Phillips screw

      • One TA-20 screw

    • Both screwdrivers must have a minimum of a three inch shank (length).

    • Screwdrivers with extenders will not fit down the access holes.

    Ajouter un commentaire

    • Lift the top half of the base from the bottom half of the base to reveal the internal mechanism.

    Ajouter un commentaire

    • Once you have the base removed, the circuit board should be clearly visible inside.

    Ajouter un commentaire

    • Remove the four screws located on the circuit board.

      • Two are on the left side.

      • Two are on the right side.

    Ajouter un commentaire

    • Remove the following soldered connections with a soldering iron:

      • Motor wires

      • Power cord wires

    Ajouter un commentaire

    • Lift the circuit board straight up to remove it from the base.

    Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Andrew

Membre depuis le 04/10/2012

170 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team 6-34, Regan Fall 2012 Membre de l'équipe Cal Poly, Team 6-34, Regan Fall 2012

CPSU-REGAN-F12S6G34

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 7

30 derniers jours : 31

Total : 2,755