Réparez vos affaires Communauté Boutique

Black and Decker CM0700BZ Water Piping Replacement

Introduction

The water pipes may become clogged, dirtied, or damaged to the point where they have to be removed and cleaned, or replaced entirely. This guide will show the steps to the disassembly process.

Ce dont vous avez besoin

  1. Black and Decker CM0700BZ Water Piping Replacement, Lid: étape 1, image 1 de 2 Black and Decker CM0700BZ Water Piping Replacement, Lid: étape 1, image 2 de 2

    • Open the lid of the coffee maker.

    • Remove the brew cup.

    Modifier

  2. Black and Decker CM0700BZ Water Piping Replacement: étape 2, image 1 de 3 Black and Decker CM0700BZ Water Piping Replacement: étape 2, image 2 de 3 Black and Decker CM0700BZ Water Piping Replacement: étape 2, image 3 de 3

    • Place your finger, screwdriver, or spudger behind the corner of the tab.

    • Pull up on the tab until it disconnects from the coffee maker.

    Modifier

  3. Black and Decker CM0700BZ Water Piping Replacement: étape 3, image 1 de 3 Black and Decker CM0700BZ Water Piping Replacement: étape 3, image 2 de 3 Black and Decker CM0700BZ Water Piping Replacement: étape 3, image 3 de 3

    • Hold the tab while pushing back on the lid.

    • The lid should open fully with the top of the lid facing down.

    Modifier

  4. Black and Decker CM0700BZ Water Piping Replacement: étape 4, image 1 de 2 Black and Decker CM0700BZ Water Piping Replacement: étape 4, image 2 de 2

    • Insert the flathead screwdriver or spudger into one of the inserts holding the lid.

    • Pry facing away from the lid to force the peg out.

    • You should hear a pop when it disconnects.

    • Hold the lid and pull it away from the other insert.

    Modifier

  6. Black and Decker CM0700BZ Water Piping Replacement: étape 5, image 1 de 1

    • To also remove the shower head, use the Shower Head guide.

    Modifier

  7. Black and Decker CM0700BZ Water Piping Replacement, Water Pipes: étape 6, image 1 de 2 Black and Decker CM0700BZ Water Piping Replacement, Water Pipes: étape 6, image 2 de 2

    • Remove the carafe holder from the bottom of the coffee machine.

    Modifier

  8. Black and Decker CM0700BZ Water Piping Replacement: étape 7, image 1 de 3 Black and Decker CM0700BZ Water Piping Replacement: étape 7, image 2 de 3 Black and Decker CM0700BZ Water Piping Replacement: étape 7, image 3 de 3

    • Place coffee maker on its side, with the bottom facing you.

    • Remove two 10mm Phillips #1 screws and one 10mm Tri-Point Y1 screws with their designated tips.

    Modifier

  9. Black and Decker CM0700BZ Water Piping Replacement: étape 8, image 1 de 3 Black and Decker CM0700BZ Water Piping Replacement: étape 8, image 2 de 3 Black and Decker CM0700BZ Water Piping Replacement: étape 8, image 3 de 3

    • Slowly pry bottom lid from the front.

    • You should hear a pop.

    • Pull up and remove the bottom lid and set aside.

    Modifier

  10. Black and Decker CM0700BZ Water Piping Replacement: étape 9, image 1 de 1

    • Follow Step #4 of the Power Button guide, but leave the button in the machine.

    Modifier

  11. Black and Decker CM0700BZ Water Piping Replacement: étape 10, image 1 de 3 Black and Decker CM0700BZ Water Piping Replacement: étape 10, image 2 de 3 Black and Decker CM0700BZ Water Piping Replacement: étape 10, image 3 de 3

    • Remove the four 10mm Phillips #1 screws.

    • Slowly pull the water tank up to expose the water pipes.

    Modifier

  12. Black and Decker CM0700BZ Water Piping Replacement: étape 11, image 1 de 3 Black and Decker CM0700BZ Water Piping Replacement: étape 11, image 2 de 3 Black and Decker CM0700BZ Water Piping Replacement: étape 11, image 3 de 3
    Outil utilisé dans cette étape :
    Tweezers
    $4.99
    J'achète

    • Squeeze on the prongs with tweezers and hold.

    • Pull the water tank while squeezing the tighteners to loosen the water pipes off of the water tank.

    • The heating element should now be loose. Remove the heating element from the machine.

    Modifier

  13. Black and Decker CM0700BZ Water Piping Replacement: étape 12, image 1 de 2 Black and Decker CM0700BZ Water Piping Replacement: étape 12, image 2 de 2

    • Squeeze and hold with tweezers again.

    • Pull the water tubes off the heating element while squeezing with tweezers.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 4 autres contributeurs

Shawn Robichaud

Membre depuis le 10/26/22

729 Réputation

4 tutoriels rédigés

Badges: 8

+ 5 badges supplémentaires

Équipe

UMass Dartmouth, Team 1-2, Shaddix Spring 2023 Membre de l'équipe UMass Dartmouth, Team 1-2, Shaddix Spring 2023

UMASSD-SHADDIX-S23S1G2

4 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 5

30 derniers jours : 33

Total : 349