Aller au contenu principal

Black and Decker LDX 120C Gear Replacement

Ce dont vous avez besoin

  1. Black and Decker LDX 120C Gear  Replacement, Outer Case: étape 1, image 1 de 1
    • For this guide we will need to use a 1.0 mm phillips #1 screw.

    • There are a total of thirteen screws that need to be removed in order to open the drill and access the interior components.

  2. Black and Decker LDX 120C Gear  Replacement: étape 2, image 1 de 1
    • Remove the four screws on the back top side of the drill.

  3. Black and Decker LDX 120C Gear  Replacement: étape 3, image 1 de 1
    • Remove the four screws that connect the chuck to the drill.

  4. Black and Decker LDX 120C Gear  Replacement: étape 4, image 1 de 1
    • Remove the five screws on the front side of the drill.

  5. Black and Decker LDX 120C Gear  Replacement: étape 5, image 1 de 1
    • Gently grab both sides of the drill casing, and separate both sides from each other.

  6. Black and Decker LDX 120C Gear  Replacement: étape 6, image 1 de 1
    • At this point you should be able to separate both as illustrated.

  7. Black and Decker LDX 120C Gear  Replacement: étape 7, image 1 de 1
    • Now all the components of the drill are visible and can be accessed.

  8. Black and Decker LDX 120C Gear  Replacement, Gear: étape 8, image 1 de 1
    • After following the prerequisite guide you will be able to access the interior components of the drill.

  9. Black and Decker LDX 120C Gear  Replacement: étape 9, image 1 de 1
    • Gently remove the top part (motor and chuck) from the rest of the drill.

  10. Black and Decker LDX 120C Gear  Replacement: étape 10, image 1 de 1
    • Make sure you do that with care so that the connection doesn't get damaged.

  11. Black and Decker LDX 120C Gear  Replacement: étape 11, image 1 de 1
    • To be able to get into the gears you will need to separate the motor from the rest.

    • And then you will be able to access the gears which is located between the motor and the chuck.

  12. Black and Decker LDX 120C Gear  Replacement: étape 12, image 1 de 1
    • Twist the gauge to change between the gear.

    • If you don't hear a clicking sound then check the gears.

  13. Black and Decker LDX 120C Gear  Replacement: étape 13, image 1 de 1
    • Twist the gear and see if the three gears rotate without jamming.

  14. Black and Decker LDX 120C Gear  Replacement: étape 14, image 1 de 1
    • Check if any gear is chipped or broken in any way.

    • If it is then you will need to change the broken gear.

  15. Black and Decker LDX 120C Gear  Replacement: étape 15, image 1 de 1
    • Using the spudger place it under the gear as illustrated.

  16. Black and Decker LDX 120C Gear  Replacement: étape 16, image 1 de 1
    • The gear will remove with just a little amount of force.

  17. Black and Decker LDX 120C Gear  Replacement: étape 17, image 1 de 1
    • The gear has been removed and now can be replaced by another gear.

Conclusion

To reassemble your device, follow these instructions in reverse order.

jeffrey zakka

Membre depuis le 02/09/16

735 Réputation

6 tutoriels rédigés

Équipe

USF Tampa, Team 11-5, Cheng Spring 2016 Membre de l'équipe USF Tampa, Team 11-5, Cheng Spring 2016

USFT-CHENG-S16S11G5

5 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 11

Total : 1,937