Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the four screws on the back top side of the drill.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the four screws that connect the chuck to the drill.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the five screws on the front side of the drill.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Gently grab both sides of the drill casing, and separate both sides from each other.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
At this point you should be able to separate both as illustrated.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
After following the prerequisite guide the interior components can now be accessed.
-
The motor is the silver cylinder in the top part of the drill.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Separate the top from the rest of the components.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Check if the connection from the motor to the trigger is connected.
-
Then check if the connection to the chip is not intact.
-
If the connection is okay then the motor is probably weak and needs to be replaced.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
To remove the motor simply twist as illustrated in the picture.
-
The way the motor is designed for the LDX 120C is that it is protected inside the aluminum cylinder which works as a magnet.
-
The inside part of the motor can not be accessed, so you will have to replace the entire motor.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Unscrew the black plastic support from the motor.
-
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.
6 commentaires
Great tutorial on how to take it apart. I'm having trouble finding the exact replacement, at least according to the numbers on the motor. Can someone verify what the correct replacement model number is? Also, is it possible to replace it with a brushless motor?