Aller au contenu principal

Black and Decker WP900 Exterior Casing Replacement

Ce dont vous avez besoin

  1. Black and Decker WP900 Exterior Casing Replacement, Exterior Casing: étape 1, image 1 de 1
    • Using the plastic tool, detach the handle tab as shown.

    • Make sure the device is unplugged.

  2. Black and Decker WP900 Exterior Casing Replacement: étape 2, image 1 de 1
    • Using the Phillips #1 screwdriver, unscrew all of the screws. There should be 8-30mm screws to remove.

    • Be sure to keep track of where each screw was placed in the device for later reassembly.

  3. Black and Decker WP900 Exterior Casing Replacement: étape 3, image 1 de 3 Black and Decker WP900 Exterior Casing Replacement: étape 3, image 2 de 3 Black and Decker WP900 Exterior Casing Replacement: étape 3, image 3 de 3
    • Remove the back panel of the external casing, leaving all internal components resting in the front panel.

    • Remove the black handle from the main external casing.

  4. Black and Decker WP900 Exterior Casing Replacement: étape 4, image 1 de 1
    • Using the Phillips #1 screwdriver, remove the two 22mm screws.

    • The metal bracket will detach with the two screws.

    • Using the Flathead 3/32" screwdriver, remove two 22mm screws.

  5. Black and Decker WP900 Exterior Casing Replacement: étape 5, image 1 de 2 Black and Decker WP900 Exterior Casing Replacement: étape 5, image 2 de 2
    • Gently pull the power cord out from the control module.

    • Remember, when reassembling the device, the black wire should be on the top.

  6. Black and Decker WP900 Exterior Casing Replacement: étape 6, image 1 de 1
    • Firmly grasping the motor dislodge the internal components from the frontal external casing.

    • Once the motor has been removed, the external casing can now be replaced.

Conclusion

To reassemble your device, follow these instructions in reverse order.

David Hutchings

Membre depuis le 03/28/16

101 Réputation

1 tutoriel rédigé

Équipe

IUPUI, Team 8-8, Wilson Spring 2016 Membre de l'équipe IUPUI, Team 8-8, Wilson Spring 2016

IUPUI-WILSON-S16S8G8

4 membres

4 tutoriels rédigés

Un commentaire

Hello, this is Adam Kinnett from Group 7. You have done an excellent job on your photos as well as the descriptions and formatting.

**One of your Wiki pages on the search says "Back and Decker".

Adam Kinnett - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 10

Total : 871